







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterTub-to-Shower Conversion in Mesquite, NV
A tub-to-shower conversion in Mesquite typically costs $3,400 to $9,800 and takes three to six working days, depending on whether we’re working with the existing drain location or reconfiguring plumbing. We remove the old tub and its surround, prep and waterproof the alcove, then set a new shower base, tile, and fixtures built for daily family use. The result is a low-threshold shower you can step into, clean in a few minutes, and hand to a child or an older parent without a second thought.
Elmstead Remodeling Mesquite handles this work as part of our Bathroom Remodeling service, and it’s one of the most requested jobs we take on in the Mesquite area. Every conversion starts with a written price before any work begins, and a background-checked, uniformed crew handles the tear-out and install. If you want a straight answer on what your bathroom needs, call us at (833) 620-6606 and a live person will pick up, day or night.
Key Takeaways
- Most Mesquite tub-to-shower conversions run $3,400 to $9,800, and a written price comes before the first day of work.
- Waterproofing behind the tile (Schluter or a comparable system) matters more than the tile you see, especially in Mesquite’s hard water and dry desert air.
- We protect floors with drop cloths and shoe covers at the door, and we schedule loud work around naps and school pickup.
- Every conversion is covered by our 365-Day Done Right Promise. If it’s not done right after the job is complete, we make it right.

When You Need Tub-to-Shower Conversion
Not every tub needs to go. But in Mesquite homes, a few situations come up often enough that we thought it was worth naming them plainly.
- The tub is old and hard to clean. A fiberglass tub with a textured floor and a tight surround collects soap scum and grime in corners you can’t reach with a sponge. When cleaning has become a chore you dread, a smooth tile shower with a built-in bench or niche changes how the bathroom feels daily.
- Someone in the house has trouble stepping over the tub wall. A standard tub wall sits around 15 inches high. If an older parent visits often, or if a child is transitioning out of bath time, a low-threshold shower with a proper slope is a safer daily setup than a tub you have to climb into.
- The tub sits unused while the shower stalls. Plenty of Mesquite families keep a tub for guests who never come and shower in a cramped stall instead. Removing the unused tub and replacing it with a generous walk-in shower is one of the most practical changes you can make.
- You’re already remodeling the bathrooms. If you’re updating a hall bath or guest bath, converting the tub to a shower at the same time keeps the plumbing and finish work focused on one phase instead of two.
- The tub surround has cracked or peeled back. Vinyl and fiberglass surrounds in Mesquite’s dry climate can pull away at seams or crack near the corners over time. Once that happens, water gets behind the panels, and the fix usually means starting fresh with proper waterproofing.
- You’re preparing the home for kids or a pet-washing station. A wide, low-entry shower works better for rinsing off a muddy dog or bathing a toddler than a deep tub does, and it’s easier to keep safe.
If any of those sound familiar, our Bathroom Remodeling in Mesquite team can walk through your space and tell you honestly whether a conversion is the right call or whether the existing layout is worth keeping.
Our Tub-to-Shower Conversion Process
We keep the process predictable because the families we work with are juggling school schedules, work, and pets. Here’s how a typical conversion goes from the first call to the final walk-through.
- In-home walkthrough and written price. We come out, measure the alcove, look at the drain location and plumbing, and talk through what you want. Before anyone picks up a tool, you receive a written price covering materials, labor, tear-out, and disposal. That price doesn’t move after the crew arrives.
- Protect the house and prep the work area. Drop cloths go down on the floors. Shoe covers go on at the door. We ask before we move anything, and we set up barriers so dust stays out of the rest of the house. If there are pets, we’ll plan around them.
- Remove the tub and inspect what’s underneath. Old tubs come out along with the surround. We check the subfloor and the drain, and we fix anything that’s rotted or misaligned before we build back. This is the step that keeps a conversion from becoming a patch job later.
- Waterproof and set the new shower base. Waterproofing is where this job lives or dies. We use a bonded waterproofing membrane (Schluter systems are our go-to) behind the tile and around the base, and we set a pre-sloped shower pan so water always drains where it should.
- Install tile, fixtures, and glass. Tile goes on the walls and floor, and we set fixtures from Kohler or Moen so replacements stay easy to source. A niche for shampoo and a bench if the space allows. Glass panels or a framed door go in last.
- Clean up and hand the bathroom back. Quiet tools during rest hours where we can manage it. Pet-safe products where there’s a choice. Before the crew leaves, we take a photo of the clean-up and show you the bathroom so you can see the floor was left the way we found it (or better).
The whole job usually takes three to six working days once materials are in hand. If your plumbing configuration is unusual, we’ll tell you upfront what that means for the timeline and the price.
The technicians who handle this work are background-checked, uniformed, and experienced. Our technicians have up to 21 years of experience, and that history shows when they’re working around the little things: a tricky threshold, an uneven subfloor, a drain that needs re-routing without cutting into the adjoining hallway.

Tub-to-Shower Conversion Pricing in Mesquite
Pricing for a tub-to-shower conversion in Mesquite depends on three things: the size of the alcove, whether the drain can stay where it is, and the tile and fixtures you choose. Here’s what we typically see.
| Item | Typical Range | Notes |
|---|---|---|
| Basic fiberglass shower pan and surround | $3,400 – $4,900 | Quickest install, easiest to clean, standard sizes |
| Tile shower on existing drain location | $5,200 – $7,400 | Full waterproofing, tile floor and walls, standard glass |
| Tile shower with bench, niche, and frameless glass | $6,500 – $9,800 | Most popular with families who want a bench or seat |
| Drain relocation or plumbing reconfiguration | + $700 – $1,800 | When the drain must move for a different footprint |
| Fixtures from Kohler or Moen | $250 – $1,100 | Price varies widely by collection and finish |
| Tile upgrade (Silestone or Caesarstone trim/accents) | $400 – $1,200 | Adds a designer finish for niche shelves or trim |
Those ranges are honest, working numbers, not teaser pricing. A few things move the price more than people expect:
- Drain location. If the new shower needs its drain moved from where the tub used to sit, that adds plumbing work. Many conversions don’t require it, but we check during the walkthrough.
- Waterproofing and a pre-sloped pan. A proper waterproofing system and a pre-sloped shower pan add a meaningful cost line. They also prevent the kind of hidden leak that shows up a year later as a soft floor or a stain on the ceiling below. We treat them as non-negotiable.
- Tile size and pattern. Large-format tile and intricate patterns take more labor than standard 12-by-12 tile. If you’re picking tile, we’ll walk you through what each pattern does to the estimate.
- Glass. A frameless glass panel looks clean and lets more light into the shower, but it costs more than a framed door. Both do the job.
Every estimate we provide is free, and it’s in writing before any work starts. If you’d rather plan around a specific budget, tell us the number, and we’ll show you which finish levels land there. Call (833) 620-6606 and a live person will help you set up the walkthrough.
A note on Mesquite water and materials
Mesquite’s water runs hard, and its air is dry. That combination affects shower conversions in ways that aren’t always obvious. Hard water leaves mineral deposits on glass and fixtures faster than in softer-water towns, so we recommend finishes like brushed nickel or matte black (from Moen or Kohler) that show less spotting, plus glass treated with a protective coating. The dry air also affects tile adhesive cure times, which is one reason we don’t rush the install and we check back on the waterproofing days after the job is done.
FAQs – Tub-to-Shower Conversion
How much does a tub-to-shower conversion cost in Mesquite?
A tub-to-shower conversion in Mesquite typically costs between $3,400 and $9,800, with the average family project landing near $5,800 for a tiled shower on the existing drain. Price depends on the alcove size, drain location, tile choice, and glass. We give a written price before any work starts, and estimates are free. Call (833) 620-6606 for an exact quote.
Can you convert a tub to a shower in the same footprint?
Yes, in most cases the shower goes in the same alcove footprint as the tub, so the wall-to-wall dimensions don’t change. The drain often stays put for standard alcove tubs, though we verify during the walkthrough because drain relocation is a cost line some homeowners don’t anticipate. If the drain needs to move, we’ll show you the number before you commit.
How long does a tub-to-shower conversion take?
Most Mesquite conversions take three to six working days from tear-out to final walk-through. Simple fiberglass installs can land at the lower end; full tile with a bench, niche, and frameless glass usually runs longer. Waterproofing cure time is part of that schedule, so we don’t shortcut it.
Do I need a permit for a tub-to-shower conversion in Mesquite?
Permit requirements depend on the scope of the job. A like-for-like swap often doesn’t require a plumbing permit, but a conversion that relocates the drain or changes the plumbing may. We check with the local building department during the walkthrough and handle the paperwork where a permit is required, so the finished work passes inspection.
The families we work with in Mesquite ask about timing for one reason: they want the bathroom usable again before school, work, and life get in the way. We keep the timeline realistic, protect the rest of the house while we’re in it, and give you the clean-up photo before we leave.
If you’re ready to plan a conversion, call (833) 620-6606 for a free estimate. A live person answers every call, 24/7. No voicemail, no auto-attendant, no waiting until Monday.
Written by the team at Elmstead Remodeling Mesquite, serving Mesquite.


